![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Re: Problem with Brand New Cocker
In Reply to: Problem with Brand New Cocker posted by Kyle on November 26, 2003 at 00:10:20:
|
Posted by: Grim_001 on November 26, 2003 at 01:03:56
|
YOu need to set your pump arm length, that is the rod on the left side of the marker. TO do this take out the bolt and spin the back block some to give you more distance. You may have to do this several times. Cock your gun, no pressure, to see if it clears, you should have about an 1/8 to 1/16 showing.
|
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |