![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
3-way Actuating Rod Adjustment
|
Posted by: baron_thrash on May 24, 2003 at 14:07:37
|
I have to install a new 3-way, so I need to remove the actuating collar (that goes to the trigger frame) from the 3-way actuating rod (that goes in the 3-way). None of the info I've found on collar adjusment says how the two rods go together, because you don't have to remove them from each other to do normal adjustment. I need to know how the collar that goes from the trigger is supposed to fit into the rod that goes through the 3-way, so that the gun will function well and won't leak. Thanks.
|
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |