Posted by: rick "Tricky_Ricky" applegarth on December 31, 2002 at 05:03:51

ok. i got a 2000 apl commemorative cocker off of someone for 180 with hinge trigger and barrel. now. i'm new to cockers to, i'm usually a mag guy. and my mag is myprimary gun but i wanted a cocker to toy with. but i'm not sure what this problem is. i have ideas but iunpo. but on to the problem. when i got it to work. ie pulling trigger, sear releasing, then cocking back, but when i release the trigger. the back block doesn't move forward. after like 3 or 5 secs, the 3way starts to vent the air like it normally does through the front. then the back block slowly moves forward. but if i push forward on the trigger. it goes back forward normally. i'm wondering if its the spring in the hinge? i've asked a few people, they said it was the timing in the lug nut. but i dont know. someone help. also. another question. exatcly how do i time the lug nut?

Follow Ups: Re: back block wont go forward PigTech 12:00:11 01/03/03 (0) Sounds like a timing issue... BodyByHostess 09:51:45 12/31/02 (1) Ram Related? Devman 15:12:29 01/19/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : ok. i got a 2000 apl commemorative cocker off of someone for 180 with hinge trigger and barrel. : now. i'm new to cockers to, i'm usually a mag guy. and my mag is myprimary gun but i wanted a cocker to toy with. but i'm not sure what this problem is. i have ideas but iunpo. but on to the problem. : when i got it to work. ie pulling trigger, sear releasing, then cocking back, but when i release the trigger. the back block doesn't move forward. : after like 3 or 5 secs, the 3way starts to vent the air like it normally does through the front. then the back block slowly moves forward. but if i push forward on the trigger. it goes back forward normally. : i'm wondering if its the spring in the hinge? : i've asked a few people, they said it was the timing in the lug nut. but i dont know. : someone help. : also. another question. exatcly how do i time the lug nut? [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]