WARPIG Tech Talk - Autococker / Minicocker


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

WARPIG Tech Talk - Autococker / Minicocker
Re: Bolt Question

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

Posted by Vampyr on October 25, 2002 at 12:15:39:

In Reply to: Re: Bolt Question posted by RazIII on October 25, 2002 at 12:05:00:

: When you said "I set my cocking rod length (loosen set screw and back it out)," does that mean I should back the whole cocking rod out (making it loose) or just adjust the screw on the back of the cocking rod (can that even be done?)

You need to hold the nut with a wrench while loosening or tightening the set screw. If you don't, you will screw the cocking rod into the hammer very tight. Then when tou try to remove it, the nut will come loose instead of backing out from the hammer.

Follow Ups:

Re: Bolt Question Razorpb 15:19:25 10/25/02 (6)
- Re: Bolt Question:isnt that wrong? elamenopee 17:47:21 10/25/02 (5)
  - Re: Bolt Question:isnt that wrong? Razorpb 18:53:48 10/25/02 (4)
    - One error-- Cocking theory. Vampyr 22:59:42 10/25/02 (3)
      - I think I grasp that, still trying to get my Razorpb 00:16:48 10/26/02 (2)
        
        Okay Vamp, I tried Razorpb 14:09:34 10/26/02 (1)
        
        Disregard last post Razorpb 14:26:15 10/26/02 (0)

Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?

Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:
: : When you said "I set my cocking rod length (loosen set screw and back it out)," does that mean I should back the whole cocking rod out (making it loose) or just adjust the screw on the back of the cocking rod (can that even be done?) : You need to hold the nut with a wrench while loosening or tightening the set screw. If you don't, you will screw the cocking rod into the hammer very tight. Then when tou try to remove it, the nut will come loose instead of backing out from the hammer.

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.