|
|
|
Re: Spyder velocity problem
In Reply to: Spyder velocity problem posted by Ftby on June 19, 2003 at 16:47:58:
|
Posted by: Orracles_rock on August 24, 2003 at 00:00:23
|
: Need somwe help here,changed main spring,changed bolt or-rings and hammer o-rings(used the right ones direct from Kingman)but still cannot get my velocity past 250 fps. i'm running hp air and have tried two different working tanks(850 presets).Any ideas on what to do next? thanks,al. Instead of changing just the main spring, u have 2 change all 3 springs. U can buy a spyder spring set 4 about $15.00 at most paintball stores. The sets have 3 sets of springs for different velocities. I had the same problem w/ my spyder |
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |