![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Higher pressure lower velocity?????
|
Posted by: splat_king_cole on April 02, 2003 at 18:14:08
|
I have a Flash with low pressure setup. The gun was shooting fine until I decided to remove the venturi from my stock bolt. After that the gun wouldn't recock. I figured more air was coming out of the bolt and less to recock so I turned up the air pressure on my regulator until it started recocking again. I fired across my chrono and it was only shooting 220 fps. When I turned up the pressure 150-200psi higher the gun started shooting about 180 fps. Obviosly I'm not an airsmith because I have no idea what is going on here. Can anyone give me an explanation (or theory)of what's happening. THANKS |
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |