WARPIG Tech Talk - Bushmaster 2000 / Defiant - Re: Two Bushmaster Questions


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

WARPIG Tech Talk - Bushmaster 2000 / Defiant

Re: Two Bushmaster Questions

In Reply to: Two Bushmaster Questions posted by Gizz on January 01, 2003 at 20:04:27:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Bushmaster 2000 / Defiant ]

Posted by:
Primal_Little_Killer
on January 15, 2003 at 23:25:08

This is my first time using this. So I'll probably screw up the first time. Anyways, it sounds like you either have some debris in your 5 way valve, or your solenoid is failend. From what I've heard it can also be caused by a pinched, or loose wire. Try to check all of your connections first and then maybe check for a pinched wire. After that you can either send it into ICD, or take apart your 5 way valve very carefully and check it out and clean it out. Just pay very close attention to how it comes apart, so you can put it back together perfectly. It's not too difficult if you take your time and be careful. Myself and my 2 sons play with 2003 B2K PDS's and one of the kids guns instantly went from shooting 220 fps. to only shooting 30 feet. I tried everything. I think.

Follow Ups:

Re: Two Bushmaster Questions Primal_Little_Killer 23:32:46 01/15/03 (2)

Re: Two Bushmaster Questions Gizz 15:36:33 03/04/03 (1)

Re: Two Bushmaster Questions Gizz 15:42:23 03/04/03 (0)

Post a Followup

Show your name as:
E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?
Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE
Subject:

Subject:Message:
: This is my first time using this. So I'll probably screw up the first time. Anyways, it sounds like you either have some debris in your 5 way valve, or your solenoid is failend. From what I've heard it can also be caused by a pinched, or loose wire. Try to check all of your connections first and then maybe check for a pinched wire. After that you can either send it into ICD, or take apart your 5 way valve very carefully and check it out and clean it out. Just pay very close attention to how it comes apart, so you can put it back together perfectly. It's not too difficult if you take your time and be careful. Myself and my 2 sons play with 2003 B2K PDS's and one of the kids guns instantly went from shooting 220 fps. to only shooting 30 feet. I tried everything. I think.

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Bushmaster 2000 / Defiant ]

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.