|
|
|
Good simplification but more complicated...
In Reply to: Re: thanks but one more question posted by Razorpb on November 25, 2002 at 15:15:54:
|
Posted by: Ras Masyean on November 30, 2002 at 00:12:48
|
effiency + output pressure count too. effiency: will you fire 180 per 1000 psi...or 220 per 1000 psi. paint barrel fit, ported barrels, marker tuning, etc determine this. ouput pressure: are you still good when the output is 300 psi? or 800 psi. With the first, you get 500 more psi of air. If you get a max flow single, you will not have to step up the output pressure to feed a second reg. You can just adjust the single reg to your marker operating pressure. : Sounds like a good deal. I know I'll get dissagreement from others on this point, but in my experience I calculate 200 shots per 1000 psi. So with my 68 3000 I get about 600 shots. With a 68 4500 I would expect about 900 shots when full. I would definetly get the 4500 in case you happen to play at a field that can actually fill that high. Hope it helps. : Razor :
|
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |