|
|
|
Re: cannon lubricants?
In Reply to: cannon lubricants? posted by Captain_Caveman on September 05, 2003 at 23:05:35:
|
Posted by: Silentdoh on October 23, 2003 at 03:52:29
|
On the big O rings I would put a thin coat of silicone grease just enough to cover it and put the silicone grease on anything else that moves or you are concerned about needing lubricant. Do this as you put the cannon together so you can get every where. Get a little grease on your finger and completly coat the o ring with it then wipe the excess grease off with a clean rag. And this is why becuase anything thinner than that will not necessarily cover everything you want coated if its coming out an oiler. and two it will not last as long as the grease will. Also the grease will make the O ring more resistent to the elements like water too
|
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |