Posted by: Dave Hall on May 03, 2003 at 01:32:11

: My LOOSE 2" barrel I first tried didn't honk like this. Going back to it and give it a try first at the field tomorrow. Thanks. WARNING: I've not tried what I'm about to say, so take it for what it's worth. If this fixes the problem, if you can modify your valve so that the solenoid bleeds to the outside rather than the downstream pipe, you should be able to go back to the tighter pipe. Also note that doing so should allow your vavle to open quicker.

Follow Ups: Re: Already set up that way Dale "Head_Hunters" DuPont 09:36:59 05/04/03 (3) Re: Already set up that way Michael "LCT_Paintball" Lyon 11:54:53 05/04/03 (2) You think that is enough port area? Dale "Head_Hunters" DuPont 12:15:25 05/05/03 (1) Re: You think that is enough port area? Michael "LCT_Paintball" Lyon 13:20:38 05/05/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : My LOOSE 2" barrel I first tried didn't honk like this. Going back to it and give it a try first at the field tomorrow. Thanks. : WARNING: I've not tried what I'm about to say, so take it for what it's worth. : If this fixes the problem, if you can modify your valve so that the solenoid bleeds to the outside rather than the downstream pipe, you should be able to go back to the tighter pipe. Also note that doing so should allow your vavle to open quicker. [ Follow Ups ] [ Post Followup ] [ WARPIG Tank Talk ]