Posted by: Dale "Head_Hunters" DuPont on December 21, 2003 at 07:13:25

: You comments about the second hole in the ASA for increased Reg flow gave me a thought. : If the need for extra volume is actually behind the valve AND in front of the restriction resultiing from the valve spring seat, then Why not port out the ASA hole and Enlarge the ASA so it adds VOLUME between the reg and body? Basically an extended ASA and with a larger internal/external diameter? All those holes go into the body in FRONT of the restriction for the valve spring seat. That's why it won't work....

Follow Ups: Re: Duh! and the answer is........ Vampyr 21:29:39 12/22/03 (2) Found it... Vampyr 21:36:58 12/22/03 (1) Good thought Dale "Head_Hunters" DuPont 09:20:35 12/23/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : : You comments about the second hole in the ASA for increased Reg flow gave me a thought. : : If the need for extra volume is actually behind the valve AND in front of the restriction resultiing from the valve spring seat, then Why not port out the ASA hole and Enlarge the ASA so it adds VOLUME between the reg and body? Basically an extended ASA and with a larger internal/external diameter? : : All those holes go into the body in FRONT of the restriction for the valve spring seat. That's why it won't work.... [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]