Posted by: Kyle "Delta_4*" Sullivan on June 13, 2003 at 00:53:19

: yes. Put it in a drill and if it wobbles its bent. Buy a new one. Or you can try fix it. It might also be the trigger return spring behind the trigger. Try a stronger one. : : ive installd it, messd with cocking rod, this, that, and i cant get it from occasionally havein the back block stay back, i took apart 3 way, and the shaft is slightly bent, would this be the problem?

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : yes. Put it in a drill and if it wobbles its bent. Buy a new one. Or you can try fix it. It might also be the trigger return spring behind the trigger. Try a stronger one. : : : ive installd it, messd with cocking rod, this, that, and i cant get it from occasionally havein the back block stay back, i took apart 3 way, and the shaft is slightly bent, would this be the problem? [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]