Posted by: Vampyr on April 21, 2003 at 20:03:00

I've answered these a few too many times, so it is now enshrined either in FAQ or tech articles at autococker.net. That being said, the most common cause for your problem is the cocking rod comming loose and backing out of the hammer. Just turn it back in by hand. Don't use a wrench. The next most common is your lug needs to be adjusted down about 1/6th of a turn (the hole in the top of the marker) : i need help , here's my problem. i was paintballing at a field and my cocker seemed to start to skip a shot here and there. like 1 out of every 3 shots , it sounded like burps !!! so i took it to the shop and the said it needed to be timed , and it cost 20 dollars!! id wrather time it my self. i asked them how do I time it and said to get a small allen key and adjust the round thing with 2 tiny screws that connected the actuating rod and the thing that goes into the 3-way. i was confused , cause the cocker manual sais to time it by putting a allen key through the whole on top of the marker , push down , and turn either clockwise or counter clock-wise. how should i time my cocker?

Follow Ups: Re: which way do you time the cocker? Razorpb 12:49:41 04/22/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : I've answered these a few too many times, so it is now enshrined either in FAQ or tech articles at autococker.net. That being said, the most common cause for your problem is the cocking rod comming loose and backing out of the hammer. Just turn it back in by hand. Don't use a wrench. : The next most common is your lug needs to be adjusted down about 1/6th of a turn (the hole in the top of the marker) : : i need help , here's my problem. i was paintballing at a field and my cocker seemed to start to skip a shot here and there. like 1 out of every 3 shots , it sounded like burps !!! so i took it to the shop and the said it needed to be timed , and it cost 20 dollars!! id wrather time it my self. i asked them how do I time it and said to get a small allen key and adjust the round thing with 2 tiny screws that connected the actuating rod and the thing that goes into the 3-way. i was confused , cause the cocker manual sais to time it by putting a allen key through the whole on top of the marker , push down , and turn either clockwise or counter clock-wise. how should i time my cocker? [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]