WARPIG Tech Talk - Autococker / Minicocker


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

Re: try

In Reply to: Re: try posted by Greezypete on March 25, 2003 at 22:51:40:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

Posted by:
Greezypete
on March 25, 2003 at 22:56:18

: : thnx.. i was planing on messing with the reg but i wasnt sure, also, will 350 be too high for my field if the limit is 250 fps?
: : thnx
:
: the pressure on an ans gx-3 is set at the factory at around 250-275 psi. resulting in a 285-290 fps
: my gx-4 is set at 250 and shooting at 280ish.
: check out www.ansusergroup.com some of thier techs frequent the sight.
also www.ansextreme.com has a manual for the gx-3 to help you set the reg.

Follow Ups:

thnx folks James_ Bianco 23:15:03 03/27/03 (0)

Post a Followup

Show your name as:
E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?
Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE
Subject:

Subject:Message:
: : : thnx.. i was planing on messing with the reg but i wasnt sure, also, will 350 be too high for my field if the limit is 250 fps? : : : thnx : : : : the pressure on an ans gx-3 is set at the factory at around 250-275 psi. resulting in a 285-290 fps : : my gx-4 is set at 250 and shooting at 280ish. : : check out www.ansusergroup.com some of thier techs frequent the sight. : also www.ansextreme.com has a manual for the gx-3 to help you set the reg.

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.