Posted by: Greezypete on February 23, 2003 at 22:00:38

: I was told that i cannot remove the plug screw on my reg because it was on the output side. If this is the case I'm screwed because I dont want to have to set my 90 and macro out the front of the reg. that would leave me with no place to hold on. Does it have to be screwed into the asa tightly or can i screw it in only enough to keep my 90 in the back by the trigger frame. it would only be 1/2 turn from tight but it wiggles. Thanks for any advise if the black magic reg is like an ans x-2 you can leave them loose to position your fittings how you like them. as for the looseness it will tighten up when you gas up your gun. at least thats how it works on the ans reg.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : I was told that i cannot remove the plug screw on my reg because it was on the output side. If this is the case I'm screwed because I dont want to have to set my 90 and macro out the front of the reg. that would leave me with no place to hold on. Does it have to be screwed into the asa tightly or can i screw it in only enough to keep my 90 in the back by the trigger frame. it would only be 1/2 turn from tight but it wiggles. Thanks for any advise : if the black magic reg is like an ans x-2 you can leave them loose to position your fittings how you like them. as for the looseness it will tighten up when you gas up your gun. at least thats how it works on the ans reg. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]