WARPIG Tech Talk - Autococker / Minicocker


Home Pictures Technical Tournament Recreational Fields Stores
Beginner Info News And Articles Links Resources Video Contact Us Search

Re: Cocking rod to tight

In Reply to: Cocking rod to tight posted by Skunker on February 23, 2003 at 05:17:26:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

Posted by:
Poldo
on February 23, 2003 at 06:53:24

the only thing i can think of is take a pair of needle nose vice grips and clamp down on the rod. that should get it out for you. now to keep the back piece from coming lose again...you need to set it just exactly where it needs to me, then loctite it in place. hope this helps
adam

Follow Ups:

Re: Cocking rod to tight Skunker 21:46:47 02/23/03 (0)

Post a Followup

Show your name as:
E-Mail address (eg: joeschmoe@aol.com):

Show your e-mail address?
Your Password:

Don't have a password? CLICK HERE - Forgot your password? CLICK HERE
Subject:

Subject:Message:
: the only thing i can think of is take a pair of needle nose vice grips and clamp down on the rod. that should get it out for you. now to keep the back piece from coming lose again...you need to set it just exactly where it needs to me, then loctite it in place. hope this helps : adam

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]

WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.