Posted by: Dale "Head_Hunters" DuPont on February 05, 2003 at 12:42:46

The port size in the bolt wall is the same size as the receiver port. No restriction there. Stock is as about as 'high flow' as one can buy.. Efficiecy, I repeat, is NOT my goal. I buy all day air and have a large 4500 psi tank for scenerio games.... Lowest pressure for lowest noise production IS my goal. 250 psi markers are common and I can't get there with a spring set and LP valve.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : The port size in the bolt wall is the same size as the receiver port. No restriction there. : Stock is as about as 'high flow' as one can buy.. : : Efficiecy, I repeat, is NOT my goal. : I buy all day air and have a large 4500 psi tank for scenerio games.... : Lowest pressure for lowest noise production IS my goal. : 250 psi markers are common and I can't get there with a spring set and LP valve. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]