![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Re: Response trigger
In Reply to: Response trigger posted by AMISH_MAFIA on January 19, 2003 at 20:47:03:
|
Posted by: Dale "Head_Hunters" DuPont on January 21, 2003 at 14:40:10
|
Mine is electronic. but I thought about just what you are thinking. Like the Tippman, install a pneumatic piston/ram behind the trigger to push it forward. Use the ram exhaust of the bolt closing to push the trigger forward. Or like the Tippman use some of the compressed air in the discharge chamber. That would require some holes in your body or barrel. I would try the plumbing off the ram first. Use a needle valve choke to control the rate of fire. There would be timing and short stoke issues as well with the cylinder trying to push the trigger forward. But go for it.
Needle Valve: Have fun. Like the Tippman Response trigger yours will push against your gripping the trigger. You point of aim will be impaired. That is why I went with an electronic trigger. The timing issues went away with the electronic controls. |
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |