![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Ram leak question
|
Posted by: foolybear on January 20, 2003 at 16:30:45
|
I'm shooting a Black Magic cocker - 2001. Recently it has developed a leak in the ram. Whenever I bump or even really touch the left side of the marker where the cocking rod runs, the 'gun starts leaking slightly from the ram. If I shoot it a couple of times, the leaking stops. I figure this is probably a pretty simple repair - maybe replacing an o-ring or something inside the ram? Help me out here. If I need to take the ram apart to fix this, give me some pointers about disassembly. I know how to remove it from the front block already, but that's as far as I know. I appreciate your help. -foolybear |
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |