|
|
|
One more thing to note...
In Reply to: please help again razorpb or m98 monkey posted by robert on November 27, 2002 at 11:46:18:
|
Posted by: BodyByHostess on December 03, 2002 at 12:45:48
|
As far as the hoses on the 3-way (or 4-way if you prefer that)... You do need to switch the two outer hoses if you install your hinge. However, if you replace your 3-way with a Shocktech Bomb, a Dye PMP, or (I think) the new WGP CT 3 or Oracle, you'll have to switch them back! These 3-ways operate differently from your stock and require the same hose switch to work. If you make both upgrades, the hose configuration will look unchanged (back 3-way hose to front of ram, front 3-way hose to back of ram). |
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |