Posted by: Angry_Hippie on November 26, 2002 at 11:21:34

No it is the 1/8" lug from a 98 cocker. I rebuilt a used 95 cocker for my buddy and we drilled out and tapped the old hammer to accept the 98 lug (and we drilled the body so we can adjust the lug from the outside). That's where my extra lug went. I do have a Email in to WGP about a 95 velocity spring and if they ever get back to me on that I'll ask them about a lug also. Thanks everyone for looking around for me. A.H. : I saw a hammer from a old cocker (pre 98??) that was smaller than the current size, it took a 3/32, I think, allen wrench to adjust. I don't know if that was changed in 98 or not, thought I'd let you know. Did you try WGP? They may send you one for nothing. ANS has some nice ones, but I don't know if they sell them singly. Hope it helps. : Razor : : : The only place I can find it for sure is the WGP Player Parts Kit. http://www.compulsivepaintball.com/tek9.asp?pg=products&specific=joqmeqi8 : : But that is a bit pricy Never mind... I reread and see that's where you had it. I'll keep looking. : : The Shocktech Hammer comes with a lug for $13.00 : : http://www.thepaintballstore.com/product281.html : : P&P makes one, but it is rounded. I am not fond of those... : : : : : I need a lug for a 98 autococker and i don't want to spend 30$ on the whole kit again. (I gave my lug out of my kit to a friend) Anyone know a online store that sells just lugs? I've tried all the pro shops around and none have cocker parts or seem intersted in gettting them for me. (Everyone around is all about Impulse's, "get an impulse" "get rid of that cocker and get an impulse everyone around here is" *gives all the pro shops around a one finger salute*) 3 years ago everyone around here swore by the cocker, now there is no love left. : : : Thanks : : : A.H.

Follow Ups: If not.. Razorpb 12:09:04 11/26/02 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : No it is the 1/8" lug from a 98 cocker. I rebuilt a used 95 cocker for my buddy and we drilled out and tapped the old hammer to accept the 98 lug (and we drilled the body so we can adjust the lug from the outside). That's where my extra lug went. : I do have a Email in to WGP about a 95 velocity spring and if they ever get back to me on that I'll ask them about a lug also. : Thanks everyone for looking around for me. : A.H. : : : I saw a hammer from a old cocker (pre 98??) that was smaller than the current size, it took a 3/32, I think, allen wrench to adjust. I don't know if that was changed in 98 or not, thought I'd let you know. Did you try WGP? They may send you one for nothing. ANS has some nice ones, but I don't know if they sell them singly. Hope it helps. : : Razor : : : : : The only place I can find it for sure is the WGP Player Parts Kit. http://www.compulsivepaintball.com/tek9.asp?pg=products&specific=joqmeqi8 : : : But that is a bit pricy Never mind... I reread and see that's where you had it. I'll keep looking. : : : The Shocktech Hammer comes with a lug for $13.00 : : : http://www.thepaintballstore.com/product281.html : : : P&P makes one, but it is rounded. I am not fond of those... : : : : : : : I need a lug for a 98 autococker and i don't want to spend 30$ on the whole kit again. (I gave my lug out of my kit to a friend) Anyone know a online store that sells just lugs? I've tried all the pro shops around and none have cocker parts or seem intersted in gettting them for me. (Everyone around is all about Impulse's, "get an impulse" "get rid of that cocker and get an impulse everyone around here is" *gives all the pro shops around a one finger salute*) 3 years ago everyone around here swore by the cocker, now there is no love left. : : : : Thanks : : : : A.H. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]