Posted by: RTR on November 20, 2002 at 14:00:38

It fits, put one (REX Nelspot) in my 2k1 DYE autococker. Rick : I forgot about the Rex adjuster, is that what your refering to? I thought that only fit pre 99 bodies not threaded for the IVG, am I mistaken? Please fill me in. : Razor : : : : I would suggest an adustable front reg to bring your ball chops to almost zero then maybe a shorter 3-way if you want to shorten up your trigger pull a bit. A 12v Rev would do just fine, you can get an X-board for about $15 and it converts your 9v to 12v, and get a 4 bladed stock impellar or one of the Vortex impellers. You adjust your velocity by pulling the cocking rod and adjusting the IVG with an allen wrench. If you want you can get an adjustable inline reg and use it to adjust your velocity. Hope it helps. : : : Razor : : You can also get a Hex kit for velocity adjustmentso you don't have to take out the cocking rod. : : They can be a bit pricy tho ... : : -Micah

Follow Ups: Thanks for the clarification RTR (NT) Razorpb 14:13:57 11/21/02 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : It fits, put one (REX Nelspot) in my 2k1 DYE autococker. : Rick : : I forgot about the Rex adjuster, is that what your refering to? I thought that only fit pre 99 bodies not threaded for the IVG, am I mistaken? Please fill me in. : : Razor : : : : : : I would suggest an adustable front reg to bring your ball chops to almost zero then maybe a shorter 3-way if you want to shorten up your trigger pull a bit. A 12v Rev would do just fine, you can get an X-board for about $15 and it converts your 9v to 12v, and get a 4 bladed stock impellar or one of the Vortex impellers. You adjust your velocity by pulling the cocking rod and adjusting the IVG with an allen wrench. If you want you can get an adjustable inline reg and use it to adjust your velocity. Hope it helps. : : : : Razor : : : You can also get a Hex kit for velocity adjustmentso you don't have to take out the cocking rod. : : : They can be a bit pricy tho ... : : : -Micah [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Autococker / Minicocker ]