Posted by: Mike "Elmojo" Piantanida_IV on October 19, 2003 at 23:03:21

Hi All, First off, great site! I'm pretty new to paintball and lovin' it! Here's the deal, I'm working on making a larger Low Pressure Chamber for my Shutter. I have a full machine shop, but I cannot figure out the Thread size/Pitch on the existing LPC. I think it is somewhere just under 3/4" dia. (0.734") and the pitch seems to be about 17-18 tpi. Does anyone know the correct specs for this thread? I would be willing to make a larger (about 5-6" long) LPC at a VERY discounted rate ($3-4) for whoever comes through with the data. Thanks in advance,

Follow Ups: Re: Need Thread size/Pitch for Shutter LPC Dale "Head_Hunters" DuPont 17:45:58 10/28/03 (0) Re: Need Thread size/Pitch for Shutter LPC Jason Greenwood 12:45:53 10/23/03 (1) You guys want to help me with my project? Dale "Head_Hunters" DuPont 17:48:40 10/28/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : Hi All, : First off, great site! : I'm pretty new to paintball and lovin' it! : Here's the deal, I'm working on making a larger Low Pressure Chamber for my Shutter. I have a full machine shop, but I cannot figure out the Thread size/Pitch on the existing LPC. I think it is somewhere just under 3/4" dia. (0.734") and the pitch seems to be about 17-18 tpi. Does anyone know the correct specs for this thread? I would be willing to make a larger (about 5-6" long) LPC at a VERY discounted rate ($3-4) for whoever comes through with the data. : Thanks in advance, [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]