Posted by: m98monkey on March 26, 2003 at 13:24:19

As long as you have a good regulator, you shouldn't have too much trouble. However, you if you plan on using a cheap reg, then expect drop off at high rof, bad consistancy, or both. However, if you got a palmer, pure energy, something decent or good, then I wouldn't worry. It is just easier to get better consistancy out of lower pressure, like 400 psi output.

Follow Ups: Note on Pure Energy recommendation.... Razorpb 16:22:58 04/03/03 (0) Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : As long as you have a good regulator, you shouldn't have too much trouble. However, you if you plan on using a cheap reg, then expect drop off at high rof, bad consistancy, or both. However, if you got a palmer, pure energy, something decent or good, then I wouldn't worry. It is just easier to get better consistancy out of lower pressure, like 400 psi output. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]