Posted by: shadow_walker on February 26, 2003 at 17:40:30

: hey i recently bought a sypyder imagine, and have only fired a case or 2 through it and theres a considerable amount of wear on the bolt, where it is exposed to the opening on the verticle feed. Is this normal, and if not how can i fix the problem. Some scratches can be expected, just make sure you have the bolt in the right way, so that the cut out for the ball detent actually goes over the ball detent, and keep it lubed well. Wow, that was all one sentence.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : hey i recently bought a sypyder imagine, and have only fired a case or 2 through it and theres a considerable amount of wear on the bolt, where it is exposed to the opening on the verticle feed. Is this normal, and if not how can i fix the problem. : Some scratches can be expected, just make sure you have the bolt in the right way, so that the cut out for the ball detent actually goes over the ball detent, and keep it lubed well. Wow, that was all one sentence. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]