Posted by: John "packer" LaCara on December 22, 2002 at 22:37:41

: When I get my parts back from Hellrazor, how do I adjust the reg that's on the DF? I think that may solve my problem with the AMG being such an air hog. Can anybody tell me which way to turn the set screw to lower the pressure and where to look to be sure it is down? Your problem isn't so much the pressure as the velocity. If you turn your velocity down you'll probably get better air consumption rates. If you really want to lower your pressure you turn the screw on your bottom line clockwise. It's probably locktited so you might have a hard time. If this doesn't work try running a remot or a bigger volumizer.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : When I get my parts back from Hellrazor, how do I adjust the reg that's on the DF? I think that may solve my problem with the AMG being such an air hog. Can anybody tell me which way to turn the set screw to lower the pressure and where to look to be sure it is down? : Your problem isn't so much the pressure as the velocity. If you turn your velocity down you'll probably get better air consumption rates. : If you really want to lower your pressure you turn the screw on your bottom line clockwise. It's probably locktited so you might have a hard time. If this doesn't work try running a remot or a bigger volumizer. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Spyder ]