|
|
|
Posted by paintballer06 on October 07, 2002 at 22:25:15:
In my spyder shutter, the bottom line leaks on two ends. On the ends, where the hose meets the part that screws into the regulator or extension chamber, when i screw in the co2, it pushes these things(Sorry, i dont know what to call them or how to descrive them), out, and it leaks air. I bought a new bottom line, but then i tried the same thing and it still leaks. I am cocking my gun, then screwing in the co2. And also my psi is about 750-800.
Steve "B-Ski" Biedrzycki
11:32:11 10/08/02
(4)
paintballer06
16:10:11 10/08/02
(0)
Subject:Message:
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |