![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Posted by paintballer86 on July 30, 2002 at 10:54:49:
In Reply to: my gun posted by
Remove the elbow and look in the hole where the paintballs go into the bolt with the bolt cocked. There is supposed to be a little rubber piece in there. Since yours fell out, there will be a little hole there. This, i think is the ball latch and keeps the balls from falling out of the barrel before they are shot. I'm not sure how to put it back in but i think, just take the gun apart and lay it where it is supposed to go and it should fit. Also lokk in your manual for the gun to see how it goes or visit the TIpmann website http://www.tippmann.com/parts/98customparts.asp for a diagram.
Let me know if this helps.