![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
Posted by LanceR on February 28, 2002 at 18:02:35:
In Reply to: Difference in RVA's??? posted by
I'm not aware of any major differences. One thing to look for is a lock-down screw. Without this, the adjuster could back out of the gun, and then the mainspring would shoot out; that could ruin your day. Also, your velocity would be dropping.
All you're doing is adjusting the tension on your mainspring. I haven't found this to be very useful on the M98, and end up using the venturi screw to adjust the velocity.