paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Bushmaster 2000 / Defiant
Leak between solenoid & manifold
[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Bushmaster 2000 / Defiant ]

Posted by Dwieland on July 27, 2001 at 21:10:45:

Have a constant leak on my Defiant coming from between the solenoid and the manifold. Tried tightening the solenoid, removed the solenoid from manifold and checked gasket. Removed solenoid valve and checked o-rings. Re-lubed everything.... no help.

Any ideas? All started when a ball jammed the bolt. Cleared that out, but now the leak.

Thanks,
Dan

Follow Ups:


Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Bushmaster 2000 / Defiant ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.