paintballHomepaintballPicturespaintballTechnicalpaintballTournamentpaintballRecreationalpaintballFieldspaintballStorespaintball
paintballBeginner InfopaintballNews And ArticlespaintballLinkspaintballResourcespaintballVideopaintballContact UspaintballSearchpaintball
WARPIG Tech Talk - Bushmaster 2000 / Defiant
Re: Also
[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Bushmaster 2000 / Defiant ]

Posted by Superannuated on May 31, 2001 at 22:29:26:

In Reply to: One more small, but important thing.....txt posted by Splat Max on May 31, 2001 at 09:15:36:

:If you buy the Vig at a store, remove the tourney (end) cap, unscrew the velocity adjuster and check the spring. If it's dull metal it's the high pressure spring. If it's glossy black it's the low pressure spring, and that's the one you need. If it has the HP spring, ask the store if they have the LP version to swap out for you (to save you a few bucks).

Regards,

Superannuated



Follow Ups:


Post a Followup

Show your name as:

E-Mail address (eg: joeschmoe@aol.com):


Show your e-mail address?

Your Password:


Don't have a password? CLICK HERE - Forgot your password? CLICK HERE

Subject:

Subject:Message:

[ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Bushmaster 2000 / Defiant ]

Copyright © 1992-2019 Corinthian Media Services.

WARPIG's webmasters can be reached through our feedback form.  All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry.