|
|
|
Posted by lee "comunist" bruhas on October 07, 2002 at 06:08:38:
ok, after it got here i replaced teh high pressure reg with a palmers stabilizer using an adapter from eclipse( www.planeteclipese.com ) ever thing worked great. ( ok so teh led was blown and teh power lead creacekd off teh battery but 15 minutes later it still works fine, solenoid clicks away) anyway i go get the air filled (3000psi 850 preset 68ci) long story iv used the reg before on a phantom pump its ok any thoughts?
i have own my bushie for 2 years with out a hitch clean it once a week and it works iole a dream.
until i got it shipped 600 miles in the back of a friends movin van(va to in)
and turn the air on
the bot goes back then forwards. i assume that the new reg is shut off
i turn it up
still nuthing
i turn it donw
nuthing
short the bolt seems set in stone
no air thorugh.
-lee
Subject:Message:
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |