|
|
|
Re: Do I need a exp. chamber with HPA?
In Reply to: Re: Do I need a exp. chamber with HPA? posted by Tom Sparkman on November 08, 2003 at 19:45:02:
|
Posted by: Clayphoto on November 10, 2003 at 01:35:14
|
I remember reading in my Palmer Stabilizer instructions that you shouldn't have an expansion chamber downstream from a regulator as it would reduce the effectiveness of the regulator considerably. Would that be an overstated concern in this case? Or would there be a noticable change in the effectiveness of the HPA tank regulator? : : Converting my rebel to nitrogen, wondering if the expansion chamber will hurt performance, or if it's ok to just leave it on. : It's OK - you'll just loose a litte more air when you degas your gun. : It'll make a nice foregrip too. : Tom
|
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |