Posted by: deadeye9 on October 01, 2003 at 12:43:28

: how do you install and dissconect macroline? Is there any web sites that explain it well? : THanks Use an Xacto knife to cut the macroline to the proper length. The cut should be perpendicular. To install, just push the hose as far as possible into the macroline fitting. To remove, degas the macroline, push the macroline into the fitting with one hand, and with the other, hold down on the "ring" around the lip of the fitting. While holding the "ring" pull the macroline out of the fitting. If I can do it, anyone can.

Follow Ups: Post a Followup Show your name as: DefaultRealnameBothNickname E-Mail address (eg: joeschmoe@aol.com): Show your e-mail address? DefaultYesNo Your Password: Don't have a password? CLICK HERE - Forgot your password? CLICK HERE Subject: Subject:Message: : : how do you install and dissconect macroline? Is there any web sites that explain it well? : : THanks : Use an Xacto knife to cut the macroline to the proper length. The cut should be perpendicular. To install, just push the hose as far as possible into the macroline fitting. To remove, degas the macroline, push the macroline into the fitting with one hand, and with the other, hold down on the "ring" around the lip of the fitting. While holding the "ring" pull the macroline out of the fitting. If I can do it, anyone can. [ Follow Ups ] [ Post Followup ] [ WARPIG Tech Talk - Air ]