|
|
|
Re: Hi Low.
In Reply to: Re: Hi Low. posted by joe on May 01, 2003 at 13:40:43:
|
Posted by: m98monkey on May 02, 2003 at 17:59:10
|
I'm still going to get a secondary reg, but we fixed the problem. We pulled apart a friends reg, exact same. His had three shims in his shim stack, mine had 4. WE pulled my one extra shim out, gassed it up, plugged it into the gun, BINGO. Stable once, except of course for the natural inconsistancy of the paint. But, I'm still thinking a second reg would be in order, or a 20 dollar upgrade from PMI, they replace the internals of a reg and change my output to 500 psi. Not sure which I should do.
|
Follow Ups:
|
Copyright © 1992-2019
Corinthian Media Services. WARPIG's webmasters can be reached through our feedback form. All articles and images are copyrighted and may not be redistributed without the written permission of their original creators and Corinthian Media Services. The WARPIG paintball page is a collection of information and pointers to sources from around the internet and other locations. As such, Corinthian Media Services makes no claims to the trustworthiness or reliability of said information. The information contained in, and referenced by WARPIG, should not be used as a substitute for safety information from trained professionals in the paintball industry. |